PE Cosmetic Bottle 700ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1901-700. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 700 ml (23.7 fl oz) |
| Bottle Weight | 72 g |
| Neck Finish | 32 mm |
| Total Height | 237 mm |
| Shoulder Height | 202 mm |
| Base (W × D) | 74 × 74 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 100 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 52 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large HDPE bottle: fabric softener, laundry detergent, household cleaners and high-volume refills. HDPE's chemical resistance and durability make it the standard for household-care packaging.
SJE1901-700 is a 700 ml PE / HDPE bottle in the family & refill size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for family-size body care, refill packs and value bundles. The 32 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 700 ml ≈ 23.7 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 74 mm diameter across the base, 237 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 3.20 : 1 (237 mm tall, 74 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 700 ml stated capacity inside a 1,298 ml rectangular outline — 54 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 72 g body weight = 10.3 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 197 mm — from the base to the 202 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 232 mm (π × 74 mm) — a wrap-around label up to 214 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 214 × 197 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 700 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 700 ml model (680 ml, 650 ml, 730 ml, 750 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE0003-750 | 750 ml | 66 g | Ø32 mm | 231 mm | +50 ml larger · same neck |
| SJE1812-730 | 730 ml | 65 g | Ø32 mm | 190 mm | +30 ml larger · same neck |
| SJE1901-700 | 700 ml | 72 g | Ø32 mm | 237 mm | This model |
| SJE1642-680 | 680 ml | 57 g | Ø32 mm | 209 mm | 20 ml smaller · same neck |
| SJE0142-650 | 650 ml | 55 g | Ø32 mm | 216 mm | 50 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
