PE Cosmetic Bottle 458ml
Download the complete PE / HDPE bottle catalog PDF.
Full engineering parameters for SJE1906-458. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 458 ml (15.5 fl oz) |
| Bottle Weight | 57 g |
| Neck Finish | 32 mm |
| Total Height | 211 mm |
| Shoulder Height | 197 mm |
| Base (W × D) | 79 × 40 mm |
| Material & Compliance | |
| Material | PE/HDPE |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size HDPE bottle: shampoo, conditioner, body wash, hand soap and general personal-care packaging. HDPE resists everyday chemicals and squeezes cleanly to the last drop.
SJE1906-458 is a 458 ml PE / HDPE bottle in the body & hair-care size range. It suits sunscreen, opaque lotions, body wash and chemical-sensitive formulations, and is commonly specified for body lotions, shampoos, conditioners and shower gels. The 32 mm neck is compatible with standard screw, pump or flip-top closure, so it adapts to pump, spray or screw formats without mold changes.
For branding, silk-screen, hot-stamp and in-mold labeling are available on this PE / HDPE body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
SJE1906-458 is 211 mm tall on a 79 x 40 mm base, so the height is 2.67 times the widest base dimension and the footprint is 31.6 cm².
| Total height | 211 mm |
|---|---|
| Base (W x D) | 79 x 40 mm |
| Footprint | 31.6 cm² |
| Height to widest base | 2.67 : 1 |
| Average content per mm | 2.17 ml |
| Empty weight per 100 mm | 27.01 g |
| Empty weight per litre held | 124.5 g |
SJE1908-458 is the closest thing we mould to SJE1906-458 at 458 ml: 1 mm taller; a 78 x 42 mm base against 79 x 40 mm here; the same 57 g empty. Moving between the two needs no new tooling.
| SKU | SJE1908-458 |
|---|---|
| Capacity | 458 ml (15.5 fl oz) |
| Height | 212 mm |
| Base | 78 × 42 mm |
| Neck | 32 mm |
| Weight | 57 g |
Stated capacity on SJE1906-458 is 458 ml, inside a body 211 mm tall. Holding the filler at a 90% line puts 412.2 ml in every unit, so a 500 L batch fills 1,213 of them.
| Batch of product | 458 ml units at 90% | Resin for those units |
|---|---|---|
| 500 L | 1,213 | 69.1 kg |
| 1,000 L | 2,426 | 138.3 kg |
| 5,000 L | 12,130 | 691.4 kg |
5,000 units of SJE1906-458 is 2,290 L of finished product, and 100,000 units is 45,800 L, which takes 5,700 kg of resin at 57 g a bottle. MOQ is per colour rather than per SKU. 211 mm and 458 ml formats can share one colour. Lead time is 15–30 days from sample sign-off and deposit.
Everything below is calculated from the nominal dimensions in the specification table above (PE / HDPE, 458 ml ≈ 15.5 fl oz, Ø32 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 79 × 40 mm base (1.98 : 1 width-to-depth). Two parallel 79 mm faces carry front and back artwork, while the narrow 40 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.67 : 1 (211 mm tall, 79 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 458 ml stated capacity inside a 667 ml rectangular outline — 69 %. A compact envelope relative to the stated capacity — space-efficient in the carton, with less shoulder void. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 57 g body weight = 12.4 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 192 mm — from the base to the 197 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 79 mm flat face → artwork up to 71 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 71 × 192 mm (W × H) flat label on each face, or a wrap label over the 40 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø32 mm screw neck — the 32/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | high-output lotion pump or wide flip-top cap. |
| Dosing note | At 458 ml the Ø32 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PE / HDPE formats to this 458 ml model (450 ml, 450 ml, 468 ml, 480 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJE1848-480 | 480 ml | 40 g | Ø28 mm | 152 mm | +22 ml larger |
| SJE1627-468 | 468 ml | 40 g | Ø28 mm | 209 mm | +10 ml larger |
| SJE1906-458 | 458 ml | 57 g | Ø32 mm | 211 mm | This model |
| SJE1829-450 | 450 ml | 67 g | Ø28 mm | 169 mm | 8 ml smaller |
| SJE1821-450 | 450 ml | 60 g | Ø28 mm | 167 mm | 8 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
