PET Cosmetic Bottle 30ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0268-55. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Detailed dimensional data for this model is available on request — contact us for the full spec sheet.
Typical applications for this small PET bottle: serums, facial toners, essential-oil blends, hand-sanitizer and travel-size skincare. The clear PET wall shows formula color, and the standard neck pairs with fine-mist sprayers, dropper or screw caps.
SJT0268-55 is a 30 ml PET bottle in the travel & sample size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for travel kits, hotel amenities, free samples and single-use sachets. The 30 mm neck is compatible with standard screw, pump or flip-top closure, so it ada so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching standard screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 30 ml ≈ 1.0 fl oz, Ø30 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 35 mm diameter across the base, 60 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 1.71 : 1 (60 mm tall, 35 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 30 ml stated capacity inside a 74 ml rectangular outline — 41 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 12 g body weight = 40.0 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 44 mm — from the base to the 49 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 110 mm (π × 35 mm) — a wrap-around label up to 101 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 101 × 44 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø30 mm screw neck — the 30/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump or wide flip-top cap. |
| Dosing note | At 30 ml the Ø30 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 30 ml model (20 ml, 15 ml, 35 ml, 40 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0034-40 | 40 ml | 5 g | Ø18 mm | 90 mm | +10 ml larger |
| SJT0168-35 | 35 ml | 5 g | Ø20 mm | 101 mm | +5 ml larger |
| SJT0268-55 | 30 ml | 12 g | Ø30 mm | 60 mm | This model |
| SJT0521-20 | 20 ml | 7 g | Ø18 mm | 65 mm | 10 ml smaller |
| SJT0587-15 | 15 ml | 5 g | Ø18 mm | 69 mm | 15 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
