PET Cosmetic Bottle 569ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0281-569. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 569 ml (19.2 fl oz) |
| Overflow Capacity (brimful) | 593 ml (20.1 fl oz) |
| Bottle Weight | 55 g |
| Neck Finish | 28/410 |
| Total Height | 210 mm |
| Shoulder Height | 194 mm |
| Base (W × D) | 102 × 55 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 154 pcs / carton |
| Carton Dimensions (L×W×H) | 76 × 50 × 45 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this large PET bottle: refillable body wash, shampoo, conditioner and household-care volumes. Large formats cut per-unit packaging cost while keeping a clean, premium look.
SJT0281-569 is a 569 ml PET bottle in the family & refill size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for family-size body care, refill packs and value bundles. The 28 mm neck is compatible with a 28/410 lotion pump, trigger or screw cap, so so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 28/410 lotion pump, trigger or screw cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
SJT0281-569 is 210 mm tall on a 102 x 55 mm base, so the height is 2.06 times the widest base dimension and the footprint is 56.1 cm².
| Total height | 210 mm |
|---|---|
| Base (W x D) | 102 x 55 mm |
| Footprint | 56.1 cm² |
| Height to widest base | 2.06 : 1 |
| Average content per mm | 2.71 ml |
| Empty weight per 100 mm | 26.19 g |
| Empty weight per litre held | 96.7 g |
| Headspace above nominal | 24 ml (4.0%) |
SJT0432-580 is the closest thing we mould to SJT0281-569 at 569 ml: 4 mm shorter; a 94 x 51 mm base against 102 x 55 mm here; 8 g lighter; a 32/410 neck where this one is 28 mm. Moving between the two needs no new tooling.
| SKU | SJT0432-580 |
|---|---|
| Capacity | 580 ml (19.6 fl oz) |
| Height | 206 mm |
| Base | 94 × 51 mm |
| Neck | 32/410 |
| Weight | 47 g |
Stated capacity on SJT0281-569 is 569 ml and the brimful figure is 593 ml, so 24 ml of headspace sits under the rim, inside a body 210 mm tall. Holding the filler at a 90% line puts 512.1 ml in every unit, so a 500 L batch fills 976 of them.
| Batch of product | 569 ml units at 90% | Resin for those units |
|---|---|---|
| 500 L | 976 | 53.7 kg |
| 1,000 L | 1,952 | 107.4 kg |
| 5,000 L | 9,763 | 537 kg |
5,000 units of SJT0281-569 is 2,845 L of finished product, and 100,000 units is 56,900 L, which takes 5,500 kg of resin at 55 g a bottle. MOQ is per colour rather than per SKU. 210 mm and 569 ml formats can share one colour. Lead time is 15–30 days from sample sign-off and deposit.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 569 ml ≈ 19.2 fl oz, Ø28 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Flat-oval body — 102 × 55 mm base (1.85 : 1 width-to-depth). Two parallel 102 mm faces carry front and back artwork, while the narrow 55 mm sides suit barcode, batch or ingredient panels. |
| Height to width | 2.06 : 1 (210 mm tall, 102 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 569 ml stated capacity inside a 1,178 ml rectangular outline — 48 %. Generous wall and shoulder clearance — a heavier, more premium feel in hand and more room for a deep shoulder radius. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 55 g body weight = 9.7 g per 100 ml. Mid-weight range: the balance most buyers settle on between hand-feel and freight cost. |
| Label & decoration zone | |
| Usable label height | Up to 189 mm — from the base to the 194 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 102 mm flat face → artwork up to 94 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 94 × 189 mm (W × H) flat label on each face, or a wrap label over the 55 mm sides for tamper evidence. |
| Neck & closure | |
| Neck finish | Ø28 mm screw neck — the 28/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | lotion pump, flip-top cap, disc-top cap or screw cap. |
| Dosing note | At 569 ml the Ø28 mm neck is the standard pairing and is normally run with a high-output pump or a wide-mouth fill opening. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 569 ml model (550 ml, 550 ml, 580 ml, 580 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0264-580 | 580 ml | 55 g | Ø32 mm | 195 mm | +11 ml larger |
| SJT0360-580 | 580 ml | 55 g | Ø32 mm | 197 mm | +11 ml larger |
| SJT0281-569 | 569 ml | 55 g | Ø28 mm | 210 mm | This model |
| SJT0545-550 | 550 ml | 47 g | Ø32 mm | 169 mm | 19 ml smaller |
| SJT0429-550 | 550 ml | 42 g | Ø28 mm | 193 mm | 19 ml smaller · same neck |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
