PET Cosmetic Bottle 120ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0350-120. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 120 ml (4.1 fl oz) |
| Overflow Capacity (brimful) | 144 ml (4.9 fl oz) |
| Bottle Weight | 19 g |
| Neck Finish | 20/410 |
| Total Height | 121 mm |
| Shoulder Height | 106 mm |
| Base (W × D) | 41 × 41 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | Confirmed per order — contact us for exact carton specs |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this small PET bottle: serums, facial toners, essential-oil blends, hand-sanitizer and travel-size skincare. The clear PET wall shows formula color, and the standard neck pairs with fine-mist sprayers, dropper or screw caps.
SJT0350-120 is a 120 ml PET bottle in the daily face-care size range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for facial serums, essences, toners and daily moisturizers. The 20 mm neck is compatible with a 20/410 lotion pump or disc-top cap, so it so it adapts to pump, spray or screw formats without mold changes.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a matching a 20/410 lotion pump or disc-top cap to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
SJT0350-120 is 121 mm tall on a 41 x 41 mm base, so the height is 2.95 times the widest base dimension and the footprint is 16.8 cm².
| Total height | 121 mm |
|---|---|
| Base (W x D) | 41 x 41 mm |
| Footprint | 16.8 cm² |
| Height to widest base | 2.95 : 1 |
| Average content per mm | 0.99 ml |
| Empty weight per 100 mm | 15.70 g |
| Empty weight per litre held | 158.3 g |
| Headspace above nominal | 24 ml (16.7%) |
SJE0146-120 is the closest thing we mould to SJT0350-120 at 120 ml: 3 mm taller; a 42 x 42 mm base against 41 x 41 mm here; 4 g lighter; a 24 mm neck where this one is 20 mm. Moving between the two needs no new tooling.
| SKU | SJE0146-120 |
|---|---|
| Capacity | 120 ml (4.1 fl oz) |
| Height | 124 mm |
| Base | 42 × 42 mm |
| Neck | 24 mm |
| Weight | 15 g |
Stated capacity on SJT0350-120 is 120 ml and the brimful figure is 144 ml, so 24 ml of headspace sits under the rim, inside a body 121 mm tall. Holding the filler at a 90% line puts 108 ml in every unit, so a 500 L batch fills 4,629 of them.
| Batch of product | 120 ml units at 90% | Resin for those units |
|---|---|---|
| 500 L | 4,629 | 88.0 kg |
| 1,000 L | 9,259 | 175.9 kg |
| 5,000 L | 46,296 | 879.6 kg |
5,000 units of SJT0350-120 is 600 L of finished product, and 100,000 units is 12,000 L, which takes 1,900 kg of resin at 19 g a bottle. MOQ is per colour rather than per SKU. 121 mm and 120 ml formats can share one colour. Lead time is 15–30 days from sample sign-off and deposit.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 120 ml ≈ 4.1 fl oz, Ø20 mm neck). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Round body — 41 mm diameter across the base, 121 mm tall overall. A round format prints and labels evenly from any angle and reads as a premium cosmetic silhouette. |
| Height to width | 2.95 : 1 (121 mm tall, 41 mm wide). Tall profile: the height carries shelf presence while the carton footprint per unit stays small. |
| Fill-to-outline ratio | 120 ml stated capacity inside a 203 ml rectangular outline — 59 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 19 g body weight = 15.8 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 101 mm — from the base to the 106 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Body circumference | 129 mm (π × 41 mm) — a wrap-around label up to 119 mm wide fits with seam clearance. |
| Recommended maximum label size | ≈ 119 × 101 mm (W × H) wrap label, or a two-panel front/back set on the same circumference. |
| Neck & closure | |
| Neck finish | Ø20 mm screw neck — the 20/410 industry standard, one of the most widely stocked closure sizes worldwide. |
| Dispensing options | fine-mist sprayer, treatment pump or disc-top cap. |
| Dosing note | At 120 ml the Ø20 mm neck is the standard pairing and is normally run with a single- or double-dose pump. Tell us the dose you need per application (ml per stroke) and we match the pump or sprayer output to it. |
Nearest PET formats to this 120 ml model (118 ml, 110 ml, 128 ml, 128 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0157-128 | 128 ml | 15 g | Ø20 mm | 126 mm | +8 ml larger · same neck |
| SJT0440-128 | 128 ml | 25 g | Ø24 mm | 136 mm | +8 ml larger |
| SJT0350-120 | 120 ml | 19 g | Ø20 mm | 121 mm | This model |
| SJT0547-118 | 118 ml | 15 g | Ø20 mm | 126 mm | 2 ml smaller · same neck |
| SJT0257-110 | 110 ml | 25 g | Ø24 mm | 126 mm | 10 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
