PET Cosmetic Bottle 250ml
Download the complete PET bottle catalog PDF for offline viewing.
Full engineering parameters for SJT0383-250. Nominal factory values — custom colors, printing and finishing available on all parameters below.
| Dimensions & Capacity | |
| Nominal Capacity | 250 ml (8.5 fl oz) |
| Overflow Capacity (brimful) | 282 ml (9.5 fl oz) |
| Bottle Weight | 35 g |
| Total Height | 120 mm |
| Shoulder Height | 106 mm |
| Base (W × D) | 70 × 49 mm |
| Material & Compliance | |
| Material | PET |
| Resin Grade | Food-contact, virgin (non-recycled) |
| Certifications | ISO 9001 / FDA / SGS |
| Recyclable | Yes |
| Packing & Order Info | |
| Carton Pack | 330 pcs / carton |
| Carton Dimensions (L×W×H) | 77 × 50 × 38 cm |
| MOQ | 5,000 units |
| Lead Time | 15–25 days |
Typical applications for this mid-size PET bottle: body lotion, hand wash, facial mist, shampoo and daily skincare. Its clarity and light weight suit retail shelves, while the neck accepts lotion pumps, sprayers or flip-top closures.
SJT0383-250 is a 250 ml PET bottle in the mid-format skincare range. It suits clear toners, facial mists, shampoos and lightweight daily-care bottles, and is commonly specified for face creams, lotions, cleansers and mid-size skincare. It works with standard screw, pump or flip-top closures to match your filling line.
For branding, UV printing, hot-stamp and shrink sleeve are available on this PET body. Pair it with a screw, pump or flip-top closure to complete a shelf-ready package at a 5,000 units MOQ, produced on ISO 9001 / FDA / SGS certified lines.
Everything below is calculated from the nominal dimensions in the specification table above (PET, 250 ml ≈ 8.5 fl oz). These figures are engineering guidance for label sizing, closure matching and freight planning — they are not a separate product specification, and final tolerances are confirmed on your approved sample.
| Body geometry | |
| Body shape | Oval body — 70 × 49 mm base (1.43 : 1 width-to-depth). A softer cross-section that sits comfortably in the hand; artwork can run as a wrap or as two facing panels. |
| Height to width | 1.71 : 1 (120 mm tall, 70 mm wide). Mid-height format: stable on standard filling and labelling lines without rail changes. |
| Fill-to-outline ratio | 250 ml stated capacity inside a 412 ml rectangular outline — 61 %. Typical wall and shoulder allowance for an injection- or extrusion-blown bottle of this size. Fill line is normally set at 90–95 % of stated capacity. |
| Unit weight | 35 g body weight = 14.0 g per 100 ml. Heavy-wall range: chosen when the bottle must feel substantial or survive repeated squeezing. |
| Label & decoration zone | |
| Usable label height | Up to 101 mm — from the base to the 106 mm shoulder line, less a 5 mm base transition. Taller artwork runs onto the shoulder with a curved-label option. |
| Front panel width | 70 mm flat face → artwork up to 62 mm wide with a 4 mm safety margin each side. |
| Recommended maximum label size | ≈ 62 × 101 mm (W × H) flat label on each face, or a wrap label over the 49 mm sides for tamper evidence. |
Nearest PET formats to this 250 ml model (248 ml, 248 ml, 260 ml, 260 ml), so you can compare a capacity step up or down without leaving the family. Every row is a stocked SKU with its own page and drawings.
| SKU | Capacity | Weight | Neck | Height | Difference |
| SJT0001-260 | 260 ml | 25 g | Ø24 mm | 148 mm | +10 ml larger |
| SJT0031-260 | 260 ml | 30 g | Ø24 mm | 172 mm | +10 ml larger |
| SJT0383-250 | 250 ml | 35 g | Ø— mm | 120 mm | This model |
| SJT0254-248 | 248 ml | 30 g | Ø24 mm | 150 mm | 2 ml smaller |
| SJT0129-248 | 248 ml | 25 g | Ø28 mm | 171 mm | 2 ml smaller |
Tell us your quantity and target market — our engineering team replies within 2 working hours with pricing, lead time and samples. No registration required.
